Ford Focus Service Manual: Engine Cooling

Ford Focus Service Manual / Powertrain / Engine / Engine Cooling

Cooling System Draining, Filling and Bleeding
Cooling System Flushing
Engine Cooling - Description and Operation
Coolant Pump
Coolant Expansion Tank
Thermostat Housing
Air Deflector - Lower, Radiator
Radiator
Cooling Fan Motor and Shroud

Valve Stem Diameter

NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specificatio ...

Cooling System Draining, Filling and Bleeding

Special Tool(s) Airlift Cooling System Tester UVU550000 or equivalent Material Item Specification Motorcraft® Premium Gold Engine Coolant ...

More about Ford Focus:

Ford Focus Camber Adjustment - Rear
Using alignment equipment and the manufacturer's instructions, measure the rear camber. NOTE: If the rear camber is below the minimum specification, the camber can be adjusted +1.0 degree by replacing the upper arm with an upper arm repair kit (3S4Z-1A154-AA). Replace the u ...