Vehicles with a Duratec engine
The fuel supply may be cut off as a result of an accident or sudden vibrations (e.g.
collision when parking).
The switch is located in the side panel in front of the driver's door.
Resetting the switch
WARNING:
Do not reset the fuel cut-off switch if you see or smell leaking fuel.
• Turn the ignition switch to position 0.
• Check fuel system for leaks.
• If no fuel leak is apparent, reset the switch by pushing in the button (see illustration).
• Turn the ignition switch to position II.
After a few seconds return the key to position I.
• Make a further check for leaks in the fuel system.
Inspecting safety system componentsFord Focus Halfshaft Seal - LH (Manual Transaxle/Transmission — MTX75)
Special Tool(s)
Installer, Halfshaft Oil Seal
308-039
Remover, Halfshaft Oil Seal
307-163 (T86P-70043-A)
Remover, Pilot Bearing
308-001 (T58L-101-B)
Material
Item
Specification
Motorcraft® Fu ...