Ford Focus Service Manual: Halfshaft Seal - RH (Automatic Transaxle/Transmission — 4F27E)

Ford Focus Service Manual / Powertrain / Driveline / Driveline Seals / Halfshaft Seal - RH (Automatic Transaxle/Transmission — 4F27E)

Special Tool(s)

	Handle 205-153 (T80T-4000-W)
	Installer, Output Shaft Seal 307-572

Material

Item	Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC (US); CXT-10-LV12 (Canada)	MERCON® LV

Halfshaft Seal RH

Item	Part Number	Description
1	—	Intermediate shaft bearing cap locknuts (2 required)
2	3N324	Intermediate shaft bearing cap
3	—	Intermediate shaft
4	1177	Halfshaft seal

Removal

Remove the front wheel and tire. For additional information, refer to Section 204-04.

Remove the RH halfshaft. For additional information, refer to Section 205-04.

Remove the halfshaft seal.

Installation

Using the Output Shaft Seal Installer and Handle, install the halfshaft seal.

Install the RH halfshaft. For additional information, refer to Section 205-04.

Install the front wheel and tire. For additional information, refer to Section 204-04.

Check the transmission fluid level and top off with transmission fluid, if necessary.

Halfshaft Seal - RH (Manual Transaxle/Transmission — MTX75)

Special Tool(s) Installer, Halfshaft Oil Seal 308-039 Remover, Halfshaft Oil Seal 307-163 (T86P-70043-A) Remover, Pilot Bearing ...

Driveshafts

...

More about Ford Focus:

Ford Focus Key Programming Using Two Programmed Keys - General Procedures
NOTE: This procedure only works if 2 or more programmed ignition keys are available. If 2 keys are not available, refer to Spare Key Programming — Using Diagnostic Equipment in this section. NOTE: The Instrument Cluster (IC) PID SPAREKEY must be enabled for this procedure to operate. If th ...