Ford Focus manuals

Ford Focus Service Manual: Seat Cushion - Rear

Ford Focus Service Manual / Body / Seating / Seats / Seat Cushion - Rear

Disassembly

NOTE:

For component identification and locations, refer to Seat — Exploded View, Rear in this section.

  1. Remove the rear seat cushion.
    • Locate the cushion latch releases under the cushion front edge.
    • Push to release the 2 latches and remove the cushion.
  1. Remove all the hog rings from the outer edge of the cushion cover.
  1. Invert the cushion cover and remove all the inner rows of hog rings.
  1. Remove the cushion cover.
  1. To remove the seat cushion latches, use an appropriate tool to release the locking tabs and pry upwards.
  1. NOTE:

    Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

    To assemble, reverse the disassembly procedure.

Seat Cushion - Front
Special Tool(s) Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool Disassembly ...

Seat Cushion Cover - Front
Special Tool(s) Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool Removal WAR ...

More about Ford Focus:

Ford Focus Piston Ring-to-Groove Clearance
Special Tool(s) Feeler Gauge Set 303-D027 (D81L-4201-A) or equivalent NOTE: Refer to the appropriate Section 303-01 for the specification. Inspect the piston for ring land damage or accelerated wear. Using the Feeler Gauge Set, measure the piston ...

© 2016-2019 Copyright www.ffguide.net