Ford Focus Service Manual: Subframe and Mounting Systems
The front subframe is bolted to the body and is used to:
- aid in structural support.
- provide mounting surfaces for the steering gear.
- provide mounting surfaces for the front suspension lower control arms, the engine mounts and for the front stabilizer bar.
The rear subframe is bolted to the body and is used to:
- aid in structural support.
- provide mounting surfaces for the rear suspension lower arms and upper arms.
For body dimension specifications, refer to Section 501-35.
Subframe - Rear
Item
Part Number
Description
1
W709634-S439
Crossmember bolts (6 required)
2
5K067
Crossmember
3
W500744
Front lower arm inbo ...
Glass & Windows
...
More about Ford Focus:
Ford Focus Flywheel Runout Check
NOTICE: Do not clean the dual mass flywheel with any kind of fluid. Use a
dry cloth only or damage to the dual mass flywheel may occur.
NOTICE: Do not clean the gap between the primary and secondary mass. Only
clean the bolt connection surface and the clutch surface or damage to the flywheel
...
© 2016-2026 Copyright www.ffguide.net
