Ford Focus Service Manual: Air Cleaner Outlet Pipe

Ford Focus Service Manual / Powertrain / Engine / Intake and Forced Induction / Air Cleaner Outlet Pipe

Disconnect the crankcase ventilation tube and vacuum tube from the Air Cleaner (ACL) outlet pipe.

Loosen the 2 ACL outlet pipe clamps.
- Remove the ACL outlet pipe.
- To install, tighten to 3 Nm (27 lb-in).

To install, reverse the removal procedure.

Intake Manifold

Intake Manifold (View 1 of 3) Item Part Number Description 1 14A464 Engine Oil Pressure (EOP) switch electrical connector (part of 12C508) 2 ...

Air Inlet Duct

Item Part Number Description 1 — Air inlet mode door actuator electrical connector (part of 18B604) 2 — Air inlet duct screw (2 require ...

More about Ford Focus:

Ford Focus Vehicle Certification Label
Base Engine Calibration Information Base engine calibration information, sometimes referred to as the powertrain calibration, is located in the lower right corner of the vehicle certification label. Engine calibration information is limited to a maximum of 5 characters per line (2 lines maxim ...