Ford Focus Service Manual: Battery Tray
Removal and Installation
- Remove the battery. For additional information, refer to Battery in this section.
- Remove the 3 nuts from the battery tray.
- To install, tighten to 12 Nm (106 lb-in).
- Remove the 4 wire harness pushpins from the battery tray and remove the tray.
- To install, reverse the removal procedure.
Battery and Cables
Vehicles are equipped with a 12-volt, maintenance-free battery.
The battery and cable system consists of the following components:
Battery
Battery cable assembly
Battery tray
The batt ...
Battery Disconnect
WARNING:
Batteries contain sulfuric acid and produce explosive gases. Work in a well-ventilated
area. Do not allow the battery to come in contact with flames, sparks or burning
substances. Avoid ...
More about Ford Focus:
Ford Focus Connecting Rod to Crankshaft Side Clearance
Special Tool(s)
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent
NOTE: Refer to the appropriate Section 303-01 for the specification.
Using the Feeler Gauge Set, measure the clearance between the connecting
rod and the crankshaft. Verify the measurement ...
Nissan Frontier - Instrument Panel - Keys - Brake system
© 2016-2026 Copyright www.ffguide.net
