Ford Focus Service Manual: Camshaft Lobe Lift

Ford Focus Service Manual / Powertrain / Engine / Valvetrain / Camshaft / Camshaft Lobe Lift

Special Tool(s)

Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent

NOTE:

Refer to the appropriate Section 303-01 for the specification.

Use the Dial Indicator Gauge with Holding Fixture to measure camshaft intake/exhaust lobe lift.
- Rotate the camshaft and subtract the lowest Dial Indicator Gauge reading from the highest Dial Indicator Gauge reading to figure the camshaft lobe lift.

Camshaft Journal to Bearing Clearance

NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: The camshaft journals must meet specifications before checking camshaft journal clearance. Measure each camshaft ...

Camshaft Position (CMP) Sensor

Material Item Specification Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Can ...

More about Ford Focus:

Ford Focus Electronic Compass
The compass signal originates from the compass module, which is integrated into the interior rear view mirror. The compass display is incorporated into the Front Display Interface Module (FDIM) . The buttons that allow the driver to operate the calibration and zone setting procedures are l ...