Ford Focus Service Manual: Camshaft Position (CMP) Sensor

Ford Focus Service Manual / Powertrain / Engine / Valvetrain / Camshaft / Camshaft Position (CMP) Sensor

Material

Item	Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent	WSS-M2C930-A

Item	Part Number	Description
1	14A464	Camshaft Position (CMP) sensor electrical connector
2	W701219	CMP sensor bolt
3	12K073	CMP sensor

Removal and Installation

Disconnect the Camshaft Position (CMP) sensor electrical connector.

Remove the bolt and the CMP sensor.
- To install, tighten to 7 Nm (62 lb-in).

NOTE:
Lubricate the O-ring with clean engine oil.
To install, reverse the removal procedure.

Camshaft Lobe Lift

Special Tool(s) Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent NOTE: Refer to the appropriate Section 303-01 for the specification. ...

Camshaft Runout

Special Tool(s) Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent NOTE: Refer to the appropriate Section 303-01 for the specification. ...

More about Ford Focus:

Ford Focus A-Pillar Trim Panel
Removal and Installation Remove the instrument panel side trim panel. Remove the 2 pin-type retainers and the A-pillar lower trim panel. Detach the upper portion of the B-pillar trim panel. NOTICE: Use care not to damage the retainer brackets during removal. Rem ...