Removal and Installation
NOTE:
The door glass must be completely raised.
The screw must be fully disengaged from the door lock cylinder bezel, although it is not necessary to fully remove the screw.
Loosen the door lock cylinder bezel screw.
Slide the front exterior door handle rearwards to release.
Remove the front exterior door handle.
Door Handle Reinforcement - Exterior, Rear
Exterior Rear Door HandleFord Focus Plastics Repair - General Procedures
Material
Item
Specification
Motorcraft® Plastic Bonding Adhesive
TA-9
—
WARNING: Always
wear protective equipment including eye protection with side shields, and a dust
mask when sanding or grinding. Failure to follow these instructions may result in
se ...