Removal and Installation
NOTE:
The door glass must be completely raised.
The screw must be fully disengaged from the door lock cylinder bezel although it is not necessary to fully remove the screw.
Loosen the rear door exterior handle bezel screw.
Slide the rear exterior door handle rearwards to release.
Remove the rear exterior door handle.
Ford Focus Cylinder Block Distortion
Special Tool(s)
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent
NOTE: Refer to the appropriate Section 303-01 for the specification.
NOTE: Use a Straightedge that is calibrated by the manufacturer
to be flat within 0.005 mm (0.0002 in) per running foot ...