Ford Focus manuals

Ford Focus Owners Manual: Parts and accessories

Ford Focus Owners Manual / Introduction / Parts and accessories

Now you can be sure that your Ford parts are Ford parts

Your Ford has been built to the highest standards using high quality Ford Original Parts. As a result, you can enjoy driving it for many years.

Should the unexpected occur and a major part needs replacing, we recommend that you accept nothing less than Ford Original Parts.

The use of Ford Original Parts ensures that your vehicle is repaired to its pre-accident condition and maintains its maximum residual value.

Ford Original Parts match Ford's stringent safety requirements and high standards of fit, finish and reliability. Quite simply, they represent the best overall repair value, including parts and labour costs.

Now it is easier to tell if you have really been given Ford Original Parts. The Ford logo is clearly visible on the following parts if they are Ford Original Parts. If your vehicle has to be repaired, look for the clearly visible Ford branding and make sure that only Ford Original Parts have been used.

Look for the Ford logo on the following parts

Sheet metal.

• Bonnet.

• Wings.

• Doors.

• Luggage compartment lid or tailgate.

Bumper and radiator grille.

• Radiator grille.

• Front and rear bumper.

Exterior mirror


• Rear window.

• Side glass.

• Windscreen.


• Rear lamps.

• Headlamp.

Symbols glossary
Symbols in this handbook WARNING: You risk death or serious injury to yourself and others if you do not follow the instructions highlighted by the warning symbol. CAUTION: You risk damaging ...

Quick start
Instrument panel overview - left-hand drive Instrument panel overview - right-hand drive A. Lighting control. See Lighting. B. Headlamp levelling control. See Lighting. C. Multi-function l ...

More about Ford Focus:

Ford Focus Key Programming Using Two Programmed Keys - General Procedures
NOTE: This procedure only works if 2 or more programmed ignition keys are available. If 2 keys are not available, refer to Spare Key Programming — Using Diagnostic Equipment in this section. NOTE: The Instrument Cluster (IC) PID SPAREKEY must be enabled for this procedure to operate. If th ...

© 2016-2023 Copyright