Ford Focus Service Manual: Rear Suspension Wheel Studs
| Item | Part Number | Description |
|---|---|---|
| 1 | 1113 | Brake drum |
| 2 | 1107 | Wheel stud |
Removal and Installation
NOTICE: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may result in major service expense. New parts must be installed with the same part numbers or equivalent part, if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure correct retention of these parts.
- Remove the brake drum. For additional information, refer to Section 206-02.
- Using a suitable press, remove the wheel stud from the brake drum and wheel
hub assembly.
- Discard the wheel stud.
- Using a suitable press, install a new wheel stud.
- Install the brake drum. For additional information, refer to Section 206-02.
Front Suspension Wheel Studs
Special Tool(s)
C-Frame and Screw Assembly
211-023 (T74P-3044-A1)
Item
Part Number
Description
1
1107
Wheel stud
Re ...
Electrical
...
More about Ford Focus:
Ford Focus Wipers and Washers
All functions are initiated by means of a wiper/washer switch (part of the multifunction
switch), which is operated by the wiper lever on the left-hand side of the steering
column.
Windshield Wiper
The windshield wiper system consists of the following components:
Washer pump and reservo ...
