Toll reader
On vehicles with an anti-heat windscreen, toll readers should be placed in the area as shown (all measurements shown in millimetres), otherwise communication performance with toll stations may be reduced.
The toll reader should be placed on the passenger side to prevent the reader from obscuring the driver’s vision (e.g. at traffic lights).
Ford Focus Key Programming Using Two Programmed Keys - General Procedures
NOTE: This procedure only works if 2 or more programmed ignition keys
are available. If 2 keys are not available, refer to Spare Key Programming — Using
Diagnostic Equipment in this section.
NOTE: The Instrument Cluster (IC) PID SPAREKEY must be enabled for
this procedure to operate. If th ...