Note: The system will be switched on automatically every time you switch the ignition on.
Vehicles with stability control (ESP) switch
Note: On Focus RS, stability control (ESP) is only reduced and not switched off completely.
Press and hold the switch for one second.
The switch will illuminate. A message will be shown in the display. See Information messages.
Press the switch again to turn the system on.
For item location: See Quick start.
Vehicles without stability control (ESP) switch
To turn the system off and on. See Information displays.
Ford Focus Programming the remote control
A maximum of eight remote controls
(including any supplied with your vehicle)
can be programmed. The remote controls
must remain inside the vehicle during the
programming procedure. Fasten the front
seat belts and close all doors to ensure
that conflicting chimes do not sound
during programmi ...