Ford Focus Service Manual: Accessory Drive Belt
Removal and Installation
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
- Remove the 2 bolts and the accessory drive belt splash shield.
- To install, tighten to 9 Nm (80 lb-in).
- Using the hex feature, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt.
- To install, reverse the removal procedure.
Accessory Drive Belt Tensioner
Removal and Installation
With the vehicle in NEUTRAL, position it on a hoist. For additional information,
refer to Section 100-02.
Remove the 2 bolts and accessory drive belt spla ...
Accessory Drive Belt Idler Pulley
Removal and Installation
With the vehicle in NEUTRAL, position it on a hoist. For additional information,
refer to Section 100-02.
Remove the 2 bolts and accessory drive belt spla ...
More about Ford Focus:
Ford Focus Bearing Inspection - Engine System
Inspect bearings for the following defects:
Cratering — fatigue failure
Spot polishing — incorrect seating
Imbedded dirty engine oil
Scratching — dirty engine oil
Base exposed — poor lubrication
Both edges worn — journal damaged
...
Nissan Frontier - Instrument Panel - Keys - Brake system
© 2016-2026 Copyright www.ffguide.net
