Ford Focus Service Manual: C-Pillar Trim Panel
Removal and Installation
- Remove the C-pillar trim panel bolt cover.
- Remove the C-pillar trim panel bolt.
- Remove the C-pillar trim panel.
- Pull the C-pillar trim panel toward the center of the vehicle to release
the C-pillar trim panel retaining clips.
- NOTICE: To avoid damage to the C-pillar trim panel, remove any retaining
clips from the body and attach them to the C-pillar trim panel before installing.
To install, reverse the removal procedure.
- To install, make sure to align the trim panel retaining clips to the
retaining clip holes in the body.
Removal and Installation
Remove the instrument panel side trim panel.
Remove the 2 pin-type retainers and the A-pillar lower trim panel.
Detach the upper portion of the B-pillar tri ...
Remove the D-pillar trim panel screw cover.
Remove the D-pillar trim panel screw.
Remove the D-pillar trim panel.
Pull the D-pillar trim panel outward to release the D-pillar tr ...
More about Ford Focus:
Ford Focus All engines Assembly
NOTE: If the oil squirters are being reused, they must be installed
in the same location as marked during disassembly.
NOTE: The front bulkhead does not have an oil squirter.
Install the 4 oil squirters.
Tighten to 4 Nm (35 lb-in).
Measure each of the cranksh ...