Ford Focus Service Manual: HVAC
Ford Focus Service Manual / HVAC
- General Information
- Climate Control System - General Information and Diagnostics
- Control Components
- Electronic Leak Detection
- Register
- Cooling
- Air Conditioning (A_C) Odor Treatment
- Air Conditioning (A_C) System Flushing
- Air Conditioning (A_C) System Recovery, Evacuation and Charging
- Air Conditioning - Description and Operation
- Fluorescent Dye Leak Detection
- Refrigerant Identification Testing
- Refrigerant Oil Adding
- Refrigerant System Tests
- Compressor
- Condenser Core
- Evaporator
- Thermostatic Expansion Valve
- A/C Lines
- Air Conditioning (A_C) Pressure Relief Valve
- Receiver Drier
- Blower Motor
- Blower Motor Resistor
- Heating
- Ventilation Doors
- Air Distribution and Filtering
- Temperature Blend Door Actuator
- Mode Door Actuator - Air Inlet Door
- Mode Door Actuator - Defrost Panel Floor Door
- Footwell Duct
Smart Junction Box (SJB)
Special Tool(s)
Vehicle Communication Module (VCM) and Integrated Diagnostic System
(IDS) software with appropriate hardware, or equivalent scan tool
...
More about Ford Focus:
Ford Focus Piston Ring-to-Groove Clearance
Special Tool(s)
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent
NOTE: Refer to the appropriate Section 303-01 for the specification.
Inspect the piston for ring land damage or accelerated wear.
Using the Feeler Gauge Set, measure the piston ...
© 2016-2026 Copyright www.ffguide.net
