Ford Focus Service Manual: Rear Lamp Assembly - Removal and Installation
Ford Focus Service Manual / Body / Body Electrical / Lighting / Exterior Lighting / Rear Lamp Assembly - Removal and Installation
| Item | Part Number | Description |
|---|---|---|
| 1 | N621926 | Rear lamp assembly nuts (2 required) |
| 2 | 13404/13405 | Rear lamp assembly (RH/LH) |
| 3 | — | Rear lamp assembly electrical connectors (part of 14405) |
Removal and Installation
- Position the luggage compartment trim panel aside.
- NOTE:
There is a blind metal snap located on the upper portion of the rear lamp assembly which requires slight effort to disengage.
Remove the 2 nuts and the rear lamp assembly.
- Disconnect the electrical connectors.
- To install, reverse the removal procedure.
License Plate Lamp - Removal and Installation
Item
Part Number
Description
1
—
License plate lamp screws (2 required) (part of 13550)
2
—
License plate lamp lens (part of 13550)
...
Stoplamp Switch - Removal and Installation
Item
Part Number
Description
1
—
Stoplamp switch electrical connector (part of 14401)
2
13480
Stoplamp lamp switch
Removal and Inst ...
More about Ford Focus:
Ford Focus Servo Bore Repair
NOTE: The 4F27 Servo Bore Master Repair Kit NRL4F27 should be used
to repair a transmission case with 2-4 band servo pin bore wear. The use of this
kit will repair the 2-4 band servo pin bore back to OEM specifications.
Install the drill jig and the 6mm bolts.
Secure the 7/16â ...
© 2016-2025 Copyright www.ffguide.net
