Ford Focus Service Manual: Cylinder Head Temperature (CHT) Sensor

Ford Focus Service Manual / Powertrain / Engine / Engine Block / Cylinder Head / Cylinder Head Temperature (CHT) Sensor

Item	Part Number	Description
1	9H589	Cylinder Head Temperature (CHT) sensor electrical connector
2	12A674	CHT sensor

Removal and Installation

Pull back the Cylinder Head Temperature (CHT) sensor cover and disconnect the electrical connector.

Remove the CHT sensor.
- To install, tighten to 12 Nm (106 lb-in).

To install, reverse the removal procedure.

Cylinder Head Distortion

Special Tool(s) Feeler Gauge Set 303-D027 (D81L-4201-A) or equivalent NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Make sure all cy ...

Engine Mount

Special Tool(s) Engine Support Bar 303-F072 Coolant Expansion Tank Item Part Number Description 1 W701107 Coolant expansio ...

More about Ford Focus:

Ford Focus Toe Adjustment - Front
Using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position. Using alignment equipment and the manufacturer's instructions, measure the toe. Loosen the tie-rod end jam nuts. Remove the steering gear boot outer clamps ...

Nissan Frontier - Instrument Panel - Keys - Brake system